Wella Climazon Millenium Manual Install [new] Jun 2026

The Climazon Millennium features infrared sensors that detect client presence and open the side wings automatically. Ensure the side panels smoothly expand outward when a test cycle is initiated. 6. Troubleshooting Common Installation Issues Probable Cause Unit will not turn on No power at outlet / Fuse blown Check breaker box; check fuse on the back of the Climazon. Wall arm droops or drifts Wall bracket is not level

Ensure the area allows for the movement of the side heating arms, which are adjustable and foldable. 2. Pedestal (Mobile) Installation: Step-by-Step The mobile version typically utilizes the ST5 Pedestal . Phase A: Assembling the Base

Allow a minimum clearance radius of 30 cm (approx. 12 inches) around the infrared heads to prevent contact with walls, curtains, or other salon furniture.

Located at the base of the control panel for powering the unit on/off. wella climazon millenium manual install

Apply a thin layer of silicone or lithium grease to the main pivot pins annually.

Available via the DB04/2 (ceiling) or BB04 (floor) mounting kits. Wella Professionals Technical Setup Requirements Electrical: Standard operation is rated for 220V - 240V Arm Adjustment:

The mobile model relies on a sturdy, weighted five-caster base for stability. verified earth ground.

Using the fixing kit provided, securely fasten the WL04 wall bracket to the wall. It must be anchored into solid structural framing (studs) for safety. Ensure it is level. Do not fully tighten the bracket bolts yet.

: Uses the ST5 tripod base with three rollers. It features a cable holder to secure the power cord within the tripod tube for safety.

Hold the wall bracket against the wall, use a spirit level to ensure it is perfectly plumb, and mark the drilling holes. or other salon furniture.

The outlet used must feature a functional, verified earth ground.

Use the integrated cable holder (standard on ST5 models) to secure the power cord, preventing tripping hazards during salon use. 3. Wall-Mounted Installation: Step-by-Step

Technical details for mounting and maintenance are also hosted on ManualsLib . Key Installation Steps Component Installation Detail Wall Mount