A simple reboot can resolve temporary driver conflicts or hung system processes.
The drive was removed without using "Safely Remove Hardware," causing the partition table or file system (FAT32/exFAT) to corrupt.
If the drive is seen but unusable: Right-click the Start button and select Disk Management .
The "USB Mass Storage Device (NAND USB2DISK)" identifier is a red flag. It reveals that your USB drive is a generic, low-cost device—most likely from FirstChip—with no branding or quality control. While some of these drives work adequately for temporary file transfers, they are . usb mass storage devicenand usb2disk full
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Identify your controller chip (e.g., FC2279, chipYC2019) using tools like ChipGenius. Download and run the corresponding . Re-flash the NAND profile to restore capacity. 5. Driver Refresh If the device shows a "Code 10" error: Go to Device Manager > Universal Serial Bus controllers .
Choose and then Let me pick from a list to refresh the driver installation. Adjust Power Management : A simple reboot can resolve temporary driver conflicts
The process:
Troubleshooting the "USB Mass Storage Device / NAND USB2DISK Full" Error: Comprehensive Repair and Recovery Guide
A real-world case study: One buyer purchased a "2TB USB Drive" for a very low price. Using tools like and ChipGenius , they found: The "USB Mass Storage Device (NAND USB2DISK)" identifier
Download the specific MPTool software and run it to force-flash a factory-fresh copy of the firmware onto your drive. Summary: Is Your USB Drive Salvageable?
Outdated or corrupted USB drivers (see Windows Q&A regarding usbstor ) hinder data transfer.
Look for (it may have a yellow exclamation mark next to it). Right-click it and select Uninstall device .
Run the tool as an in Windows. Many older tools are unstable on newer Windows versions. Experiment with compatibility modes (e.g., Windows 7) if you encounter issues. Insert the target USB drive, making sure to remove all other USB storage devices to avoid confusion.
Method 5: Reinstall/Update Drivers (For Drivers-Related Issues)