Ts1162 Installation Manual Exclusive !!exclusive!! -

: Indicates a total loss of RS-485 communication with the host panel [1.12]. Check the continuity of your D+ and D- wires and ensure the device address matches the polled configuration in the panel database.

Connects directly to the Challenger RS-485 LAN .

This exclusive technical manual provides comprehensive, step-by-step instructions for the physical installation, rack integration, data interface connection, and initial configuration of the TS1162 storage drive. 1. System Requirements & Pre-Installation Planning

90 Watts during continuous high-speed tape motion Idle Power Consumption: 35 Watts Interface Compatibility ts1162 installation manual exclusive

control and an open collector output for controlling door relays or strikes. Ness Corporation Addressing & Configuration DIP Switches : Use DIP switches 1 through 4 to set the unique RAS address LAN Termination

: The open collector output can be wired to a door relay or strike. For high-draw strikes, ensure a separate power supply and flyback diode are used to protect the keypad circuit. Step 4: System Addressing and Programming

: Connect to the 12VDC auxiliary power output on the Challenger Panel or Intelligent Access Controller. : Indicates a total loss of RS-485 communication

Map the TS1162's onboard input to a specific (e.g., "Request to Exit").

Maintenance and care

I/O wiring (digital inputs/outputs, analog) Ness Corporation Addressing & Configuration DIP Switches :

can be connected directly to the Challenger RS-485 LAN at this distance Elias connects only

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.