| Specification | Detail | | :--- | :--- | | | Custom-cut, single aluminum rail for straight stairs | | Load Capacity | 125 kg to 146 kg (max) | | Speed | 0.15 m/s (max) | | Power | 24V DC (2x 12V batteries) | | Folded Width | 365 mm (14.4") | | Electrical Supply | 115V/60Hz (NA) or 230V (EU) dedicated outlet | | Usability | Joystick control; optional auto-swivel seat for safe exiting |
Lower the seat assembly onto the post. Ensure the swivel mechanism locks securely into place facing forward, as well as at the 45-degree and 90-degree rotate points used for safe exit at the top landing.
: Rails are mounted to the stair treads (not the wall) using stanchions or feet.
: The staircase must meet the minimum width requirement (typically 28–30 inches) to allow the carriage to move freely without obstruction. thyssenkrupp levant stair lift installation manual top
Verify the rail angle matches the pitch of the stairs using a digital angle finder (typically between 28° and 53°).
Drive the lift to the absolute top or bottom terminal until beeping stops. Safety edge depressed
Insert the high-tensile splice bolts through the pre-drilled holes in the rail web. | Specification | Detail | | :--- |
This is the core of the keyword The manual splits the rail installation into three phases: Bottom, Middle, and Top. We focus on the top.
: Locate a standard electrical outlet near either the top or bottom landing to power the smart charging system. Step-by-Step Installation Process 1. Rail Preparation and Cutting
Use a bubble level to ensure the rail is perfectly straight. : The staircase must meet the minimum width
Contains rail brackets (feet), charging strips, stops, and fasteners. 3. Installing the Rail brackets and Track
: Ensure the staircase is free of obstructions like wall decorations or loose carpeting.