Manually push the X and Y axes across their travel lengths (ensure it is safe to do so and the vertical axis is secured).
: Use the manual teach pendant for delicate settings, utilizing the for fine-tuning movements within the mold. 2. Programming with Visual Control Systems
The hot end forming process involves heating a thermoplastic material to a temperature where it becomes pliable and can be molded into a specific shape. Sepro robots play a crucial role in this process by precisely handling and manipulating the hot plastic parts. sepro robot user manual hot
Robotic overheating rarely happens without a underlying mechanical or electrical stressor. The most frequent culprits include: Mechanical Overload and Friction
This module uses a visual, task-based format that bypasses direct code entry. Operators use a hardware joystick on the teach pendant to visually position the robot inside the mould, saving coordinates directly to predefined blocks. Point Markers (SAP Markers) Manually push the X and Y axes across
Dry linear guide rails and ball screws increase friction drastically.
Necessary if you need to trace a faulty thermal sensor wire from the motor back to the control cabinet cards. Programming with Visual Control Systems The hot end
Signals that the vertical telescopic arm motor is overheating, often due to counterbalancing issues.
The file opened.
Before tearing into mechanical components, inspect the electronic housing. Power down the controller safely using the main switch.
Remove and clean the intake air filters. Clogged filters are the number one cause of drive module overheating.