Satlink Ws-6906 Software Upgrade Jun 2026

With the PC tool waiting for a hardware signal, flip the power switch on your . The PC loader will automatically discover the interface and begin transmission. A progress bar will track the data flash, which usually takes roughly 60 seconds to finish.

: Ensure the battery is charged to at least 70% or connect it to the wall charger during the update.

Turn the meter back on to verify that it boots up normally into the new software interface. Troubleshooting Common Errors Target Not Connect / No Response The computer is not communicating with the meter. satlink ws-6906 software upgrade

Your USB-to-RS232 adapter driver may be outdated or incompatible. Install the official FTDI or Prolific drivers.

The finder will automatically restart once the upgrade is finished. Updating Satellite Parameters With the PC tool waiting for a hardware

Let’s be honest: this is not an iPhone update. You cannot update the WS-6906 directly over Wi-Fi or air. The process is strictly "Old School."

on your computer. If possible, right-click the program and select "Run as Administrator" to ensure it has proper access to your COM ports. Power On the Meter : Turn the power switch to the Establish Connection : In the software, look for a confirmation message such as "Succeed connecting COM1" (the COM port number may vary). Click Load the Firmware "Load Software" button in the program. Select the correct file from your computer. Execute the Update to begin the process. : Ensure the battery is charged to at

: Be cautious when using third-party firmware found on forums. Some newer hardware revisions of the WS-6906 may become inoperable if flashed with older, incompatible firmware.

Because the Satlink WS-6906 relies on a legacy architecture, the update cannot be done over Wi-Fi. You must physically connect the meter to a PC. Ensure you have the following components ready:

This method is the most reliable for deep firmware overwrites.

To help locate specific firmware files or tools, please share the or current firmware version shown in your system settings menu. Share public link