Rak283 Blood: Pressure Monitor User Manual

Shows which user profile is active for data logging.

Before using your RAK283 Blood Pressure Monitor, make sure to:

Where the arm cuff tube connects to the main unit.

If you need help with a specific part of your RAK283 monitor, please tell me: The exact on the screen (if any) Whether you are running it on batteries or a USB cable If the cuff is failing to inflate or inflating too tight rak283 blood pressure monitor user manual

If the monitor encounters an issue during a reading, it will display an error code instead of numbers. Error Code Potential Cause No pulse signal detected or cuff is too loose. Reposition the cuff tightly and try again. Err 2 Excessive movement or talking during measurement. Sit completely still and silent for the next test. Err 3 Inflation error or air tube leak.

Thank you for purchasing the RAK283 Blood Pressure Monitor. This device has been designed for accuracy, ease of use, and long-term durability. Please read this entire manual carefully before using the device for the first time to ensure correct readings and safe operation. Keep this manual in a safe place for future reference.

Stay completely still and do not talk. Rest 5 minutes and retry. Signal noise or pulse cannot be detected. Shows which user profile is active for data logging

Built-in sensor alerts you to irregular heartbeats during testing.

For RAK283 :

Accesses stored past readings for tracking trends. Error Code Potential Cause No pulse signal detected

Press the MEM button to toggle between User 1 (A) and User 2 (B). Press SET to confirm.

This device is designed to be a non-invasive measurement system for adult patients to measure systolic and diastolic blood pressure and pulse rate, using the oscillometric method. It is intended for use in both medical facilities and home environments.

Manual version 2.1 – Valid for RAK283 models manufactured after January 2024.