Nokia 31 Scatter File Verified: The Ultimate Guide to Flashing and Unbricking
Once loaded, the tool will populate a checklist of partition files (boot, recovery, system, etc.).
Technically yes, by building a partition table based on the dumchar_info output and memory addresses. However, this is highly complex and error-prone. It's much safer to use a scatter file from the official stock ROM. nokia 31 scatter file verified
Follow these steps to flash your device using the SP Flash Tool : Help with flashing stock ROM on Nokia 3.1 (Mediatek MT6750)
[SP Flash Tool Interface Example] Download-Agent: MTK_AllInOne_DA.bin Scatter-loading: MT6737_Android_scatter.txt [X] preloader 0x0000000000000000 [X] boot 0x0000000001D80000 [X] recovery 0x0000000002D80000 [X] system 0x0000000004D80000 Use code with caution. Step 4: Execute the Flash Nokia 31 Scatter File Verified: The Ultimate Guide
This is typically included inside the extracted stock firmware folder (e.g., MT67xx_Android_scatter.txt ).
Click "Options" -> "Connection" -> Set to "USB HIGH SPEED". In the "Download Agent" section, load your DA file. Click "Advanced" -> "Check LIB USB Auth" -> Disable it. This is required for Nokia 31. It's much safer to use a scatter file
SP Flash Tool should detect the phone and begin the flashing process. The progress bar will advance, and you'll see a log in the bottom window.
If the scatter loads without syntax errors but you encounter download errors, the issue is likely with the USB connection (driver issues or a bad cable), the download agent (DA) file, or the firmware itself. Try using a different USB port, reinstalling drivers, or using a different computer.
The scatter file contains unsupported characters or corrupted line endings (common after copying from Mac or Linux). Fix: Open the scatter file in Notepad++ and change EOL conversion to Windows (CR LF). Remove any \r or stray characters.