If you need to configure specific aspects of your machine, tell me:

The system allows you to define evaluation metrics such as (Arithmetic Mean Roughness), (Maximum Height of Profile), and (Root Mean Square Roughness). Cut-off Value (

Align the component horizontally so the stylus tracks perfectly perpendicular to the lay (machining direction) of the surface texture. Lower Detector: Slowly descend the

Allows users to recalculate previously measured data by changing standards or parameters without needing a new measurement.

Secure the drive unit to the column mount using the provided hex wrenches.

The vertical distance between the highest peak and lowest valley over the entire evaluation length. 7. Maintenance and Troubleshooting Preventative Maintenance Checklist

Press the button. The machine will trace the block and automatically update its calibration gain matrix. 3. Setting Up Measurement Parameters

The average of absolute profile deviations from the mean line over the evaluation length. Maximum Height of Profile

To get the most out of this precision instrument, you can access technical documentation directly through the Mitutoyo Europe Downloads section or the Mitutoyo B2B Webshop . For immediate reading, the Surftest SJ-400 Series Manual

Standard 2µm diamond tip with a measuring force of 0.75mN (optional 5µm/4mN tips available). 2. Unpacking, Hardware Setup, and Installation

The Mitutoyo Surftest SJ-400 series offers high-accuracy, skidless surface roughness and contour measurement, featuring a