Maintenance Box Resetter For Epson L6170 Exclusive Jun 2026

Unscrew the single screw and pull the maintenance box out.

If you only replace the box, the counter stays at 100%. Epson’s official solution is that you must take the printer to an authorized service center to have them reset it for $50-80 per visit. That’s why learning to reset yourself pays off in 1-2 uses.

Instead of throwing away a perfectly good plastic housing, you can simply clean the sponges (or replace them with generic cotton pads) and reuse the box.

Ultimate Guide to Maintenance Box Resetter for Epson L6170 Go to product viewer dialog for this item. : Fixing "Service Required" Errors If you own an Epson EcoTank L6170 Go to product viewer dialog for this item. maintenance box resetter for epson l6170

Plug the printer back in and turn it on. The error message should no longer appear, and you can resume normal printing operations.

When using a resetter, you must choose one of two options to handle the actual liquid:

If you have a resetter on hand, you can fix the error in 30 seconds rather than waiting days for a replacement part to ship. How to Use a Maintenance Box Resetter for Epson L6170 Unscrew the single screw and pull the maintenance box out

The maintenance box is not a simple sponge that you can throw away; it contains a tiny that communicates with the printer about how much capacity remains. Once the printer believes the box is full, you cannot resume printing until you replace the box or reset that chip’s counter.

For the Epson L6170, simply replace the maintenance box with a genuine Epson C934C when the printer warns you. That’s the safest, cleanest, and most reliable method. Use a resetter only if you fully understand the risks and have a way to contain waste ink.

If your printer locks up in the middle of an urgent print job, you can reset the chip in under a minute and resume printing immediately. That’s why learning to reset yourself pays off in 1-2 uses

Using a chip resetter is straightforward, but it requires precision to avoid damaging the delicate chip contacts. Step 1: Turn Off and Unplug the Printer

Slide the maintenance box back into its original slot inside the printer.