This is often caused by a driver mismatch or selecting the wrong COM port in the CPS settings.
: Used with the firmware update program . For portable radios, you may need to enter "Download Mode" by holding the PTT and orange button while powering on.
This guide assumes you have downloaded the official Hytera_USB_Driver_Setup.exe file. hytera usb driver
Required for older analog or entry-level models (like the PD365 or TC series) that use a serial-based programming cable, often requiring the Prolific PL2303 driver. Standard Installation Steps
Extract all files from the ZIP folder—do not run the installer from within a compressed folder. This is often caused by a driver mismatch
Windows may prompt you with a "New Hardware Found" wizard. You can point this wizard to the folder containing the extracted Hytera driver files.
The Hytera USB Driver is an essential official package that enables Windows PCs to reliably detect and communicate with Hytera digital (DMR) and analog radios. It acts as a bridge between the radio's hardware and the , allowing for frequency writing, firmware updates, and data acquisition. 2. Version Information This guide assumes you have downloaded the official
Hytera digital radios, including popular models like the PD6, PD7, and H-series, are renowned for their robustness and advanced digital features. However, to customize channel settings, update firmware, or enable specialized features, you need to connect your radio to a computer. The bridge between your Hytera device and your computer is the .
Click "Next" through the typical wizard. Note the default installation path (usually C:\Program Files (x86)\Hytera\USB Driver ).
for the driver to install (may take 30–60 seconds).
Yes, this is the recommended approach. The driver is a lower-level software that the CPS will rely on to communicate with the radio. Installing the driver first ensures that when you run the CPS, all necessary communication pathways are already in place.