The device will display a progress bar. Once finished, it will reboot automatically into the new firmware. Technical Tips & Troubleshooting Screen Alignment Issues
If the screen goes black, the progress bar sticks, or the device fails to boot after the update, try these troubleshooting steps: The "Brick" Recovery (Internal SD Card Method)
Crucially, there are multiple hardware revisions of the FNIRSI 1014D. Using the wrong firmware will cause the update to fail. To check your version: fnirsi1014d firmware update work
: Use a USB data cable to connect the oscilloscope to your computer. Enable USB Export : On the oscilloscope, navigate to the menu and select the USB Export Prepare Storage : A new drive will appear on your computer. Delete all existing files on this drive before proceeding. Transfer File : Copy the downloaded FSI-1014.bin file onto the now-empty oscilloscope drive. Execute Update : Unplug the USB cable, power the device , and then power it
: Safely "eject" or "unmount" the drive from your PC before disconnecting the cable. The device will display a progress bar
He turned off the lights, the green LED of the scope glowing softly in the dark, humming with its new, smarter brain.
Connect the USB cable from the back of the oscilloscope to an open USB port on your computer. Using the wrong firmware will cause the update to fail
By carefully following these steps, you should be able to update your FNirsi-1014D firmware successfully, ensuring your device has the latest features and performance improvements. Always refer to the official documentation or contact support if you encounter any issues.
Power on the oscilloscope, enter the main menu, and select the USB Export option.
After the device reboots, the update is not technically finished. New firmware can sometimes shift calibration data or reset settings.
The FNIRSI-1014D requires a specific button combination to enter its bootloader state:
