Easy Print Es-9930u Driver

Easy Print Es-9930u Driver

รุ่นใหม่ ราคาประหยัด ES-9930U ใช้งานผ่านสาย USB เท่านั้น. Tel: 02-0964936 ฝ่ายขาย 09.00-18.00 น. EasyPrint Thailand

Select the printer interface type. For the ES-9930U, this is typically .

Once installed, configure your print settings to match your specific label sizes. Setting Up 4x6 Shipping Labels easy print es-9930u driver

: In your browser's print dialog, set the scale setting to Fit to Printable Area or 100% to prevent low-resolution scaling issues. Third-Party Logistics Systems

Before starting the installation, ensure your ES-9930U is plugged into a power outlet and turned on, but unless the installer explicitly prompts you to do so. For Windows Users (Windows 11, 10, 8, 7) For the ES-9930U, this is typically

The "U" in ES-9930U refers to . This unit connects to your Windows PC, Mac, or even Linux system via a standard USB-B port (the square-shaped one, similar to many traditional printers).

Open the cover and place the thermal paper roll (typically 100x150mm for shipping labels) with the printable side facing up. Connection: Step 4: Configure the Port Settings

To download the ES-9930U driver, follow these simple steps:

From the drop-down menu or list, select (or the corresponding 80mm/receipt series if grouped by print width). Choose USB as your primary communication interface.

Plugged into a reliable power source and turned on.

Follow the on-screen prompts. Accept the License Agreement and click . Step 4: Configure the Port Settings

6 responses to “OBS Studio 26.1.0 for Linux – Now with Virtual Camera Support.”

  1. Timothy (TRiG) Avatar
    Timothy (TRiG)

    Thanks for this.

    This gives me a “Start virtual camera” button. When I click it I am prompted to enter my password. And that’s it. Nothing changes. I still have a “Start virtual camera” button, no stop button. Any idea what I’m doing wrong?

    Reply
    1. Jonathan Avatar
      Jonathan

      Sorry Timothy, I honestly don’t know, my setup just worked!

      Reply
    2. eg Avatar
      eg

      Does the user whose password you enter have root privileges?

      Reply
    3. Dylan Eastridge Avatar
      Dylan Eastridge

      try these commands from the OBS website

      Virtual Camera

      Starting with OBS 26.1.0, Virtual Camera support is integrated. Here’s how to install and configure v4l2loopback:

      sudo snap connect obs-studio:kernel-module-observe
      sudo apt -y install v4l2loopback-dkms v4l2loopback-utils
      echo “options v4l2loopback devices=1 video_nr=13 card_label=’OBS Virtual Camera’ exclusive_caps=1” | sudo tee /etc/modprobe.d/v4l2loopback.conf
      echo “v4l2loopback” | sudo tee /etc/modules-load.d/v4l2loopback.conf
      sudo modprobe -r v4l2loopback
      sudo modprobe v4l2loopback devices=1 video_nr=13 card_label=’OBS Virtual Camera’ exclusive_caps=1

      Reply
      1. linker3000 Avatar
        linker3000

        Be aware that in this post the single and double quotes have been ‘prettified’ so if you copy/paste the lines from here, before you hit enter, edit the command line and delete all quotes then put them back in using your keyboard. If you don’t do this, your virtual camera will be called just ‘OBS

        Reply
        1. Jonathan Avatar
          Jonathan

          Are you referring to this post, or a post I linked to? I’m not using any single or double quotes in my post.

          Reply

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.