This is the easiest method, using the device’s internal loader mechanism.
Click the or Download button to begin the installation.
: You must keep the Power button held down throughout the entire flashing process. The device may appear to power cycle, but do not release the button. Execute Flash : Select the newly appeared COM port in the tool.
The DSO2512G uses a specific chip architecture that requires dedicated flashing software. dso2512g firmware install
In the settings grid, check and select "Reset and Run" if available. Step 4: Flash the Firmware Click the "Start Programming" button in FlyMcu.
Copy the downloaded .bin firmware file into the root folder of this USB drive. Note: Ensure the file is not inside a subfolder. 4. Safely Disconnect
: Note down any custom calibration settings, as updates may reset them. This is the easiest method, using the device’s
: Newer firmware versions are often tied to specific hardware versions (e.g., PCB V9.1 vs. V10.1). Attempting to flash incompatible firmware may cause issues with the AUTO function or screen display .
Installing new firmware on the DSO2512G ensures you have the latest measurement capabilities and the smoothest user experience. This guide provides a detailed, step-by-step walkthrough of the . 1. Why Update Your DSO2512G Firmware?
To accept new firmware, the oscilloscope must be forced into its serial bootloader mode instead of launching its standard user interface. Turn the oscilloscope completely . The device may appear to power cycle, but
The instructions provided by Rigol were straightforward: connect the oscilloscope to the computer using a USB cable, turn on the device, and then run the firmware update tool. John carefully followed the steps:
There are two main sources for DSO2512G firmware: