| Component | Version | |-----------|---------| | Base Station Firmware | (latest stable) | | Headset Firmware | 40372.0 (or 39964.3 for older revisions) | | Transmitter (RF) | 386.0 |
The version of the software you choose matters greatly. Download the version tailored to your specific operating system:
Alternatively, click the in the top right and select Check for Updates . astro a50 gen 4 firmware update
If your headset loses power or you unplug the USB cable during an update, you could corrupt the firmware, potentially "bricking" your device. If this happens, try forcing the headset into bootloader mode as described above. If that fails, you will likely need to contact Logitech G customer support for further assistance.
| Issue | Frequency | Typical Cause | |-------|-----------|----------------| | “Update failed” at 50–75% | Very High | Headset not seated correctly in base station | | Base station not detected | High | Driver conflict / USB port power saving | | Headset stuck in boot loop after update | Medium | Interrupted write to headset flash memory | | Update completes but no audio | Medium | Firmware mismatch between headset and base | | Mac unable to complete update | High | Mac version of Command Center is outdated | | Component | Version | |-----------|---------| | Base
Comprehensive Guide to ASTRO A50 Gen 4 Firmware Updates (2026)
To update your headset, you must use a PC or Mac, as consoles cannot perform firmware updates directly. If this happens, try forcing the headset into
If the headset becomes unresponsive, hold down the Game button (located on the right ear cup paddle) and the Dolby button (located below the power switch) simultaneously for 15 seconds. The headset will hard-reboot. Place it back on the cradle and restart the ACC software.
